Nowadays, everyone has higher requirements for their own quality of life, and the coffee machine is a symbol. So, what is the solution for the coffee machine not grinding beans? What should I pay attention to when using a coffee machine?
What is the solution to the coffee machine not grinding beans?
1. If the beans are not ground after turning on the machine, it is mainly caused by the blade being stuck by the larger coffee beans. It is necessary to turn off the power first, then rotate its thickness disk to the larger number position, and then start the coffee machine. The larger coffee beans can be ground. Then turn it off again, rotate the thickness disk to its original position, and finally start it up and use it normally.
2. If it is caused by water in the bean silo, you need to turn off the power, then take out the bean silo to clean it up, and then install it after it is dry and it can be used normally. Because if the bean silo is then filled with water, the ground bean flour will be mixed with the water, and then stick to the gear, making it impossible to rotate, and the beans cannot be ground.
3. If it is caused by the blockage of the water filter, it needs to be dealt with according to the situation. If the blockage is not serious, it can be cleaned up directly. If the blockage is serious, the filter element needs to be replaced with a new one.
Precautions when using the coffee machine
1. If the water is stopped, the coffee machine cannot be turned on.
2. Before using the coffee machine, you need to observe what area the boiler pressure pointer is in. If it is a green area, it can be used. In addition, in the process of using the coffee machine, the temperature of the steam wand and other parts is very high, so do not touch it with your hands or get too close to avoid burns.
3. After each use of the coffee machine, it is necessary to cut off the power supply in time, and clean the inside of it, so as not to be unable to clean for a long time.
