What Are The Five Common Coffee Machine Failures And Solutions

Jun 08, 2021

Leave a message

Common faults and solutions of coffee machine

1、 There is no steam or the coffee is not hot

Possible causes

1. A large amount of hot water is discharged in a period of time (it is not recommended to use the hot water function of the coffee machine).

2. The coffee machine is not on.

3. There is no power.

4. Other reasons.

The image is provided by the registered user "looking up at the sky", and the copyright notice is provided for feedback

resolvent

1. Stop using a lot of hot water first, and then use the coffee machine 10-20 minutes later.

2. Turn on the switch of the coffee machine, such as the sequence from 0 to 1 and then to 2 (the switch is different for different coffee machines).

3. Check whether the machine power indicator (green light) is on. If it is on, please contact the supplier. If not, please check whether the switch is on. If it is on, ask the electrician to check the power supply.

4. Other reasons should be described clearly as far as possible, and the fault should be reflected to the supplier.

2、 There is no coffee coming out of the handle filter, or there is air jet in the brewing head, or there is noise in the machine

Possible causes

1. The water inlet or outlet switch of the water filter is closed.

2. Internal blockage of water filter or pipe blockage.

3. Other reasons.

resolvent

1. Turn on the water inlet switch.

2. Check the working condition of the water filter and replace the filter element if necessary.

3. Other reasons should be described clearly as far as possible, and the fault should be reflected to the supplier.

3、 Water leaking from around the handle when extracting coffee

Possible causes

1. The handle is not fully fastened or there is too much coffee powder.

2. The sealing rubber ring of scouring head is aged and worn.

3. Other reasons.

resolvent

1. Buckle the handle again and fasten or repaint.

2. Inform the supplier to replace the sealing rubber ring.

3. Other reasons should be described clearly as far as possible, and the fault should be reflected to the supplier.

4、 The steam or hot water pipe is dripping

Possible causes

1. The steam switch is not fully closed.

2. The inner sealing ring of steam rod joint is aging.

3. Other reasons.

resolvent

1. Close the steam lever switch completely.

2. Inform the supplier to change.

3. Other reasons should be described clearly as far as possible, and the fault should be reflected to the supplier.

5、 When extracting coffee, the flow rate is too slow or too fast

Possible causes

1. When the machine is normal, the scale of the grinder needs to be adjusted.

2. Or the filling pressure should be adjusted.

3. Or the amount of powder should be adjusted.

4. Other reasons.

resolvent

Other reasons should be described clearly as far as possible, and the fault should be reflected to the supplier.


Send Inquiry
OEM / ODM Coffee Grinder Manufacturer
Start Your Coffee Grinder Project
Tell us your product requirements, target market, or customization needs. Our engineering and sales team will respond within 24 hours with professional support and quotation details.
 
Custom burr sizes and grinder configurations
 
OEM branding and packaging support
 
Fast response for distributors and wholesale buyers
Send Us an Inquiry
Fill out the form below and our team will contact you shortly.